FAQs & Troubleshooting
Popular |
Innov-is NV870SE
56 Results
1.
How do I adjust the sensitivity of the operation keys?
2.
How do I retrieve the patterns from the machine’s memory?
3.
How do I save the embroidery patterns in the machine’s memory?
4.
How do I hoop the fabric in the embroidery frame?
5.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
6.
Tutorial videos on how to use the machine [Video instructions]
7.
How to use the Multi-purpose Screwdriver.
8.
Fabric puckers
9.
How do I select or display patterns according to the embroidery frame size?
10.
How do I clean the race?
11.
How do I enter a line feed in the embroidery pattern?
12.
Where do I put the oil in my machine?
13.
"Preventive maintenance is recommended" appears on the LCD.
14.
Bobbin thread breaks
15.
Stitches are skipped
16.
How do I attach or remove the Embroidery Unit?
17.
How do I wind the bobbin?
18.
"Not enough available memory to save." message appears on the LCD. What does it mean?
19.
"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
20.
How do I set the bobbin ?
21.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
22.
"This pattern cannot be used." message appears on the LCD. What does it mean?
23.
How do I adjust thread tension for embroidering?
24.
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
25.
How do I change the font type in the embroidery pattern?
26.
How do I remove or attach the presser foot ?
27.
How do I thread the machine (Threading the upper thread)?
28.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
29.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
30.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?