FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov750eeuk.jpg)
Innov-is 750E
44 Results
1.
Place a spool of thread on a spool pin.
2.
Embroidery
3.
How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
4.
Where do I put the oil in my machine?
5.
How do I clean the race?
6.
How do I wind the bobbin?
7.
How do I adjust a bobbin case using an embroidery pattern?
8.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
9.
How do I select patterns from the embroidery cards (sold separately)?
10.
How do I correctly install a bobbin?
11.
Upper Threading (Threading the upper thread)
12.
When thread got tangled.
13.
It is difficult to pass the thread through the needle bar thread guide(hook).
14.
Upper threading (Point)
15.
F** or "F*" appears on the LCD. What does it mean?
16.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
17.
Fabrics and stabilizer material for embroidery
18.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
19.
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
20.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
21.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
22.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
23.
How do I attach the embroidery frame?
24.
"Lower the presser foot lever." appears on the LCD.
25.
"Deleting..." message appearing on the LCD. What does it mean?
26.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
27.
"Select a pattern." message appearing on the LCD. What does it mean?
28.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
29.
"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
30.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?