FAQs & Troubleshooting
Latest |
CS-80
39 Results
1. 12/12/2018
It is difficult to pass the thread through the needle bar thread guide(hook).
2. 12/12/2018
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
3. 12/12/2018
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
4. 12/12/2018
When thread got tangled.
5. 12/12/2018
Fabric and Thread
6. 12/12/2018
Incorrect thread tension
7. 26/05/2016
When should I use the extra spool pin?
8. 31/03/2016
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
9. 31/03/2016
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
10. 31/03/2016
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
11. 31/03/2016
How do I thread the needle?
12. 31/03/2016
How do I wind the bobbin?
13. 23/03/2016
How do I load the spool into the thread cassette?
14. 23/10/2015
Why does the lower thread keep breaking?
15. 21/10/2015
Combination of fabric, thread and needle
16. 22/04/2015
How do I sew a blind hem?
17. 24/01/2014
How do I manually thread the needle?
18. 24/01/2014
Upper Threading (Using the twin needle)
19. 22/04/2013
An "E6" message appears on the panel.
20. 22/04/2013
An "E5" message appears on the panel.
21. 22/04/2013
An "E4" message appears on the panel.
22. 22/04/2013
An "E3" message appears on the panel.
23. 22/04/2013
An "E2" message appears on the panel.
24. 22/04/2013
An "E1" message appears on the panel.
25. 20/11/2012
The thread tension is incorrect.
26. 20/11/2012
Why does the upper thread keep breaking?
27. 20/11/2012
Why does the needle keep breaking?
28. 08/11/2011
Where do I put the oil in my machine?
29. 10/06/2009
How do I sew such as vinyl, leather, quilting layers and velvet?
30. 07/04/2009
How do I remove the presser foot holder?