FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs80euk.jpg)
CS-80
39 Results
1.
An "E4" message appears on the panel.
2.
An "E5" message appears on the panel.
3.
An "E1" message appears on the panel.
4.
Place a spool of thread on a spool pin.
5.
How do I wind the bobbin?
6.
It is difficult to pass the thread through the needle bar thread guide(hook).
7.
Why does the lower thread keep breaking?
8.
Fabric and Thread
9.
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
10.
Why does my thread keep jamming?
11.
Why does the needle keep breaking?
12.
Combination of fabric, thread and needle
13.
How do I manually thread the needle?
14.
Why does the upper thread keep breaking?
15.
How to I attach the spool of thread to my machine?
16.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
17.
When thread got tangled.
18.
Upper Threading (Using the twin needle)
19.
How do I thread the needle?
20.
An "E2" message appears on the panel.
21.
How do I sew buttonholes?
22.
How do I sew an applique?
23.
Where do I put the oil in my machine?
24.
How do I remove the presser foot holder?
25.
How do I sew a blind hem?
26.
My auto threader is not working. What should I do?
27.
Incorrect thread tension
28.
The thread tension is incorrect.
29.
When should I use the extra spool pin?
30.
How do I load the spool into the thread cassette?