FAQs & Troubleshooting
Popular |
CS70
69 Results
1.
Combination of fabric, thread and needle
2.
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
3.
Thread tension [Video instructions]
4.
How do I thread my machine? (For models equipped with the needle threader)
5.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
6.
Buttonhole sewing [Video instructions]
7.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
8.
Where do I put the oil in my machine?
9.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
10.
An "E5" message appears on the panel.
11.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
12.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
13.
How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
14.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
15.
How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
16.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
17.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
18.
How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
19.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
20.
An "E6" message appears on the panel.
21.
How do I change the needle ?
22.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
23.
Adjusting the stiitch length and width [Video instructions]
24.
How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
25.
How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)
26.
How do I thread my machine? (Threading the needle manually [without using the needle threader])
27.
How do I wind the bobbin?
28.
An "E1" message appears on the panel.
29.
Place a spool of thread on a spool pin.
30.
How do I correctly install a bobbin?