FAQs & Troubleshooting
Popular |
CM800Q
327 Results
1.
Mat and Cutting Blade Combinations
2.
Can I create the cutting data for ScanNCut from the image data?
3.
How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
4.
The mat or the material catches on a feed roller during cutting/drawing.
5.
Downloading Optional Design Pattern Collection
6.
The mat is fed in at an angle and is not fed during cutting / drawing.
7.
List of Error Messages for CanvasWorkspace (Others)
8.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
9.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
10.
Mat and Material Combinations
11.
Can I create the cutting data for ScanNCut from vector graphics data?
12.
E00007 appears on the computer screen.
13.
Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
14.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
15.
How to use Enhanced Image Tracing function. [Video]
16.
About Blade Extension, Cutting Pressure and Mat
17.
What type of data can my ScanNCut machine be used?
18.
Adjusting the Blade Extension
19.
There are deep cuts completely through the mat.
20.
ErrS09 appears on the computer screen.
21.
How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
22.
E94001 appears on the computer screen.
23.
E00006 appears on the computer screen.
24.
How to hide the adjustment lines and view the tracing area on Enhanced Image Tracing function. [Video]
25.
How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
26.
How to use Enhanced Image Tracing function via Tablet. [Video]
27.
How to Install and Uninstall the Holder
28.
The machine is turned off (Auto Shut Down).
29.
Embossing Function Activation [Video]
30.
What should I do if the scanned and cut positions are misaligned?