FAQs & Troubleshooting
Popular |
CM700
326 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
What type of data can my ScanNCut machine be used?
3.
Adjusting the Blade Extension
4.
Can I create the cutting data for ScanNCut from vector graphics data?
5.
Can I create the cutting data for ScanNCut from the image data?
6.
Downloading Optional Design Pattern Collection
7.
The mat is fed in at an angle and is not fed during cutting / drawing.
8.
ErrS10 appears on the computer screen.
9.
What type of cut files and projects containing cut data other than built-in patterns are available?
10.
Replacing the Blade
11.
E00009 appears on the computer screen.
12.
What should I do if the scanned and cut positions are misaligned?
13.
What should I do if the desired network SSID is not displayed when setting up the wireless network using the Setup Wizard?
14.
Can multiple sheets of material be overlapped and attached to the mat?
15.
Mat and Cutting Blade Combinations
16.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
17.
ErrS04 appears on the computer screen.
18.
E01006 appears on the computer screen.
19.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
20.
Where can I purchase any consumables or options for Brother Cutting Machine?
21.
The mat or the material catches on a feed roller during cutting/drawing.
22.
When the mat is inserted, the attached material peels off.
23.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
24.
Mat and Material Combinations
25.
ErrS99 appears on the computer screen.
26.
ErrS06 appears on the computer screen.
27.
E01003 appears on the computer screen.
28.
How to Install and Uninstall the Holder
29.
The WLAN Automatic Update Function does not work correctly. What should I do?
30.
ErrS09 appears on the computer screen.