FAQs & Troubleshooting
Popular |
CM600DX
300 Results
1.
Downloading Optional Design Pattern Collection
2.
Mat and Cutting Blade Combinations
3.
About Blade Extension, Cutting Pressure and Mat
4.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
5.
Mat and Material Combinations
6.
Adjusting the Blade Extension
7.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
8.
ErrS03 appears on the computer screen.
9.
The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
10.
Attaching & Peeling Off the Material
11.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
12.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
13.
How to make Quilt.(using High tack adhesive fabric support sheet)[Video]
14.
Preparation of Craft Paper / Fabric
15.
The Exported Cut Data is Different from the Desired Data
16.
ErrS23 appears on the computer screen.
17.
E10007 appears on the computer screen.
18.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
19.
E00010 appears on the computer screen.
20.
E00003 appears on the computer screen.
21.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
22.
Can I create the cutting data for ScanNCut from the image data?
23.
The machine is turned off (Auto Shut Down).
24.
Replacement Criteria
25.
Editing Functions [Video]
26.
ErrS25 appears on the computer screen.
27.
E10006 appears on the computer screen.
28.
E02006 appears on the computer screen.
29.
E02005 appears on the computer screen.
30.
N11001 appears on the computer screen.