FAQs & Troubleshooting
Popular |
PR-620/620C/600II/600IIC
70 Results
1.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
2.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
3.
How do I thread the needle. [Video instructions]
4.
How to set up the cap frame driver. [Video instructions]
5.
How do I thread my machine (Threading the upper thread). [Video instructions]
6.
How to set up the cap frame. [Video instructions]
7.
"Stop while needle bar case transferring." message appearing on the LCD. What does it mean and how do I clear it?
8.
Why won't the machine pick up the bobbin thread?
9.
How do I thread the machine? (Threading the upper thread)
10.
Recommendation accessories
11.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
12.
"Unknown data format." message appearing on the LCD. What does it mean and how do I clear it?
13.
"The selected embroidery pattern exceeds size of the frame." message appearing on the LCD. What does it mean and how do I clear it?
14.
"Check if thread is broken." message appearing on the LCD.
15.
Why won't the tension set on my sewing machine?
16.
Why is the outline sewing off the pattern?
17.
Why does the needle keep breaking?
18.
Fabric/stabilizer compatibility chart
19.
Fabric and Thread
20.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
21.
"Preventive maintenance is recommended" appears on the LCD.
22.
"Not enough space. Delete some patterns or use a different USB media." message appearing on the LCD. What does it mean and how do I clear it?
23.
"Needle threader error." message appearing on the LCD.
24.
"Embroidery card read error." message appearing on the LCD. What does it mean and how do I clear it?
25.
"Pocket read error." message appearing on the LCD. What does it mean and how do I clear it?
26.
"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
27.
"Needle case motor has been locked." message appearing on the LCD. What does it mean and how do I clear it?
28.
Why does my thread keep jamming?
29.
I tried to update the machine with USB media and pushed "USB HOST". But the screen didn't change for more than 5 minutes and I still can't upgrade it.
30.
Maintenance (Cleaning the bobbin case)