1.

How to use the Multi-purpose Screwdriver. [ Position “1” ]

2.

How do I clean the race?

3.

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

4.

"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?

5.

How do I specify the needle drop position using the sensor pen?

6.

How do I thread my machine ?

7.

"Preventive maintenance is recommended" appears on the LCD.

8.

When thread got tangled.

9.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

10.

"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?

11.

"This key cannot be used at this time." message appears on the LCD. What does it mean?

12.

"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?

13.

"This file cannot be used." message appears on the LCD. What does it mean?

14.

About Sensor Function Area

15.

How do I wind the bobbin?

16.

"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?

17.

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

18.

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

19.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

20.

The bobbin thread cannot be pulled up.

21.

The machine does not make stitches

22.

How to use the Multi-purpose Screwdriver. [ Position “2” ]

23.

How do I remove or attach the presser foot holder?

24.

For better results when sewing stretch fabrics

25.

How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?

26.

How do I specify the sewing end point with the sensor pen for utility stitches?

27.

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

28.

"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?

29.

"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?

30.

"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?