FAQs & Troubleshooting
![]() |
Latest |
![](/g/b/img/product/hf_inovvm6200deas.jpg)
Innov-is VM6200D
108 Results
1. 24/05/2023
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
2. 02/05/2023
Where do I put the oil in my machine?
3. 14/12/2022
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
4. 25/09/2020
The machine does not make stitches
5. 24/09/2020
The bobbin thread cannot be pulled up.
6. 09/07/2019
"This key cannot be used at this time." message appears on the LCD. What does it mean?
7. 09/07/2019
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
8. 09/07/2019
"Set the clock." message appears on the LCD. What does it mean?
9. 09/07/2019
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
10. 09/07/2019
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
11. 09/07/2019
"This USB media is incompatible." message appears on the LCD. What does it mean?
12. 09/07/2019
"This USB media cannot be used." message appears on the LCD. What does it mean?
13. 09/07/2019
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
14. 09/07/2019
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
15. 09/07/2019
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
16. 09/07/2019
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
17. 09/07/2019
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
18. 09/07/2019
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
19. 05/07/2019
How do I remove or attach the presser foot holder?
20. 12/12/2018
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
21. 12/12/2018
Upper threading (Point)
22. 12/12/2018
When thread got tangled.
23. 12/12/2018
Fabric and Thread
24. 06/08/2018
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
25. 02/05/2018
"This file cannot be used." message appears on the LCD. What does it mean?
26. 16/02/2017
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
27. 29/07/2016
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
28. 29/07/2016
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
29. 29/07/2016
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
30. 29/07/2016
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?