FAQs & Troubleshooting
Popular |
Innov-is VM6200D
108 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
3.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
4.
Combination of fabric, thread and needle
5.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
6.
Why does the lower thread keep breaking?
7.
When thread got tangled.
8.
Fabric and Thread
9.
The bobbin thread cannot be pulled up.
10.
How do I set the bobbin ?
11.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
12.
How do I clean the race?
13.
How do I sew a blind hem?
14.
How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
15.
How do I specify the sewing end point with the sensor pen for utility stitches?
16.
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
17.
"This key cannot be used at this time." message appears on the LCD. What does it mean?
18.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
19.
"This file cannot be used." message appears on the LCD. What does it mean?
20.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
21.
"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
22.
"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
23.
"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
24.
"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
25.
"OK to delete the setting?" message appears on the LCD. What does it mean?
26.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
27.
"Failed to save file." message appears on the LCD. What does it mean?
28.
"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
29.
How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
30.
How to specify the Guideline Marker Position With the Sensor Pen