FAQs & Troubleshooting
![]() |
Latest |
![](/g/b/img/product/hf_inov980deas.jpg)
Innov-is 980D
64 Results
1. 20/05/2024
F** or "F*" appears on the LCD. What does it mean?
2. 21/12/2023
How do I raise or lower the feed dogs?
3. 12/12/2018
It is difficult to pass the thread through the needle bar thread guide(hook).
4. 12/12/2018
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
5. 12/12/2018
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
6. 12/12/2018
Upper threading (Point)
7. 12/12/2018
When thread got tangled.
8. 12/12/2018
Fabric and Thread
9. 12/12/2018
Incorrect thread tension
10. 02/07/2018
"Disconnect the foot controller." message appearing on the LCD. What does it mean?
11. 04/06/2018
"Raise presser foot lever." message appearing on the LCD. What does it mean?
12. 04/06/2018
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
13. 04/06/2018
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
14. 16/02/2017
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
15. 07/06/2016
The embroidery cover (the extension table) cannot put on the embroidery unit.
16. 31/03/2016
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
17. 31/03/2016
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
18. 31/03/2016
"Saving..." message appearing on the LCD. What does it mean?
19. 31/03/2016
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
20. 31/03/2016
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
21. 31/03/2016
"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
22. 31/03/2016
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
23. 31/03/2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
24. 31/03/2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
25. 31/03/2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
26. 31/03/2016
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
27. 31/03/2016
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
28. 23/10/2015
Why does the lower thread keep breaking?
29. 21/10/2015
Combination of fabric, thread and needle
30. 14/05/2015
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?