FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov600eas.jpg)
Innov-is 600
39 Results
1.
Where do I put the oil in my machine?
2.
"Delete the selected pattern." appears on the LCD.
3.
Why does the needle keep breaking?
4.
Place a spool of thread on a spool pin.
5.
When thread got tangled.
6.
Upper Threading (Threading the upper thread)
7.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
8.
How do I correctly install a bobbin?
9.
F** or "F*" appears on the LCD. What does it mean?
10.
For better results when sewing stretch fabrics
11.
How do I thread the twin needle?
12.
How do I manually thread the needle?
13.
How do I wind the bobbin?
14.
"Lower the presser foot lever." appears on the LCD.
15.
"Release twin needle setting." message appearing on the LCD. What does it mean?
16.
"Saving..." message appearing on the LCD. What does it mean?
17.
With free-motion quilting, skipped stitches or needle breakage occur
18.
It is difficult to pass the thread through the needle bar thread guide(hook).
19.
"Can not change." message appearing on the LCD. What does it mean?
20.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
21.
"Lower the buttonhole lever." appears on the LCD.
22.
"Lift the buttonhole lever." appears on the LCD.
23.
"Disconnect the foot control." appears on the LCD.
24.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
25.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
26.
"The safety device has been activated." appears on the LCD.
27.
How do I remove the presser foot holder?
28.
How do I raise or lower the feed dogs?
29.
Why does my thread keep jamming?
30.
The thread tension is incorrect.