FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8120eas.jpg)
CS-8120
42 Results
1.
Combination of fabric, thread and needle
2.
How do I remove the presser foot holder?
3.
Why does my thread keep jamming?
4.
Why does the lower thread keep breaking?
5.
When thread got tangled.
6.
Fabric and Thread
7.
Where do I put the oil in my machine?
8.
Upper Threading (Using the twin needle)
9.
How do I manually thread the needle?
10.
Why does the upper thread keep breaking?
11.
Why does the needle keep breaking?
12.
When should I use the extra spool pin?
13.
How do I thread the needle?
14.
How do I load the spool into the thread cassette?
15.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
16.
"Press needle position button to raise needle." appears on the LCD.
17.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
18.
"Disconnect the foot control." appears on the LCD.
19.
How do I sew buttonholes?
20.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
21.
How do I wind the bobbin?
22.
The thread is looping when I try to wind a bobbin.
23.
How do I correctly install a bobbin?
24.
How to I attach the spool of thread to my machine?
25.
"Lower the presser foot lever." appears on the LCD.
26.
It is difficult to pass the thread through the needle bar thread guide(hook).
27.
"Can not change." message appearing on the LCD. What does it mean?
28.
"Saving..." message appearing on the LCD. What does it mean?
29.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
30.
"Delete the selected pattern." message appearing on the LCD. What does it mean?