FAQs & Troubleshooting
Popular |
TD-4420TN
106 Results
1.
How to load the Ribbon
2.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
3.
The printing position of small label is incorrect.
4.
Using the CommTool (for Windows)
5.
The label is skipped when printing.
6.
Where can I find the printer's network settings, such as IP address?
7.
How to install the Windows driver via Wi-Fi®/ wired network
8.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
9.
The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows “Head Open”.
10.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
11.
How to attach the External Roll Mount (Optional)
12.
How to load the Media
13.
How to set the Direct Thermal or Thermal Transfer Print Methods
14.
How to add a new stock from the Seagull driver
15.
How to add Microsoft Excel text to a Label List (P-touch Editor 5.x for Windows)
16.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
17.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
18.
How to update the firmware
19.
How to identify your Operating System (OS) for Windows or Mac
20.
The left or right side of the label is not printed correctly.
21.
I cannot print and the printer driver I installed is not recognized correctly by the computer (For Windows 10 Version 1903)
22.
How to adjust the cut position (For Windows)
23.
I cannot print barcodes correctly using BarTender.
24.
I cannot install the Windows driver.
25.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.
26.
The time on the printer is incorrect.
27.
The label wraps around the platen roller when using the cutter.
28.
How to skip the AUTO.BAS program only one time by directly operating the printer
29.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
30.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)