FAQs & Troubleshooting
Popular |
PR670E / PR670EC
99 Results
1.
How to use the Round frame (PRPRFK1) [Video instructions]
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
4.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
5.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
6.
How to Embroider on Shoes. [Video instructions]
7.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
8.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
9.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
10.
How to set up the cap frame driver. [Video instructions]
11.
How to Embroider on Clothes. [Video instructions]
12.
How to use the the versatile magnetic frame [Video instructions]
13.
How to set up the cap frame. [Video instructions]
14.
How to Embroider on Cap. [Video instructions]
15.
Maintenance (Cleaning the bobbin case) [ Video ]
16.
"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
17.
How to Embroider on Bag. [Video instructions]
18.
How to Embroider on Pet Collar. [Video instructions]
19.
"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
20.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
21.
Maintenance (Clean the hook)
22.
How do I install a bobbin into the machine?
23.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
24.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
25.
How do I embroider on small pieces of fabric ?
26.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
27.
Loops appear on the surface of the fabric when embroidering.
28.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
29.
How do I attach Iron-On Stabilizer (Backing) to Fabric ?
30.
Maintenance (Cleaning the thread paths of the upper threads)