FAQs & Troubleshooting
 |
Latest |
Innov-is NS1150E
51 Results
1. 07/12/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 03/12/2024
Stitches are skipped
3. 02/22/2024
Fabric puckers
4. 07/31/2023
How do I hoop the fabric in the embroidery frame?
5. 07/31/2023
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
6. 07/31/2023
How do I attach or remove the embroidery frame ?
7. 07/31/2023
How do I change the needle ?
8. 07/31/2023
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
9. 05/02/2023
Where do I put the oil in my machine?
10. 04/03/2023
How do I retrieve the patterns from the machine’s memory?
11. 04/03/2023
How do I save the embroidery patterns in the machine’s memory?
12. 04/03/2023
How do I edit a single letter in the embroidery pattern?
13. 04/03/2023
How do I change the font type in the embroidery pattern?
14. 04/03/2023
How do I remove or attach the Embroidery foot ?
15. 04/03/2023
How do I attach or remove the Embroidery Unit?
16. 04/03/2023
How do I remove or attach the presser foot ?
17. 04/03/2023
How do I thread the machine (Threading the upper thread)?
18. 04/03/2023
How do I wind the bobbin?
19. 04/03/2023
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
20. 03/06/2023
How do I set the bobbin ?
21. 02/14/2023
How do I clean the race?
22. 01/25/2023
"USB media error" message appears on the LCD. What does it mean?
23. 10/05/2022
Tutorial videos on how to use the machine [Video instructions]
24. 06/16/2022
Needle breaks.
25. 06/10/2022
How do I adjust thread tension for embroidering?
26. 06/10/2022
Upper thread breaks.
27. 06/02/2022
Bobbin thread breaks
28. 02/14/2018
"Not enough available memory to save." message appears on the LCD. What does it mean?
29. 07/21/2017
"F**" appears on the LCD. What does it mean?
30. 07/21/2017
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?