FAQs & Troubleshooting
Popular |
Innov-is BQ3100
125 Results
1.
How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
2.
How do I change the needle ?
3.
The bobbin thread cannot be pulled up.
4.
The machine does not make stitches
5.
How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
6.
How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
7.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
8.
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
9.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
10.
"Set the clock." message appears on the LCD. What does it mean?
11.
How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
12.
Where do I put the oil in my machine?
13.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
14.
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
15.
"This key cannot be used at this time." message appears on the LCD. What does it mean?
16.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
17.
"OK to delete the setting?" message appears on the LCD. What does it mean?
18.
"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
19.
How do I set the bobbin ?
20.
How do I wind the bobbin?
21.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
22.
How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
23.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
24.
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
25.
How do I specify the sewing end point with the sensor pen for utility stitches?
26.
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
27.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
28.
"This file cannot be used." message appears on the LCD. What does it mean?
29.
"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
30.
"Sensor module error." message appears on the LCD. What does it mean?