FAQs & Troubleshooting
Popular |
Innov-is 900D
99 Results
1.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
2.
The embroidery cover (the extension table) cannot put on the embroidery unit.
3.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
4.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
5.
Combination of fabric, thread and needle
6.
Fabric and Thread
7.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
8.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
9.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
10.
How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
11.
How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
12.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
13.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
14.
How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
15.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
16.
How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
17.
How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
18.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
19.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
20.
How do I clean the race?
21.
How do I raise or lower the feed dogs?
22.
Fabrics and stabilizer material for embroidery
23.
Embroidery
24.
Place a spool of thread on a spool pin.
25.
F** or "F*" appears on the LCD. What does it mean?
26.
How do I thread the needle?
27.
How do I manually thread the needle?
28.
How do I thread the machine (Threading the upper thread)?
29.
"Lower the presser foot lever." appears on the LCD.
30.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?