FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8150eus.jpg)
CS-8150
42 Results
1.
Combination of fabric, thread and needle
2.
When should I use the extra spool pin?
3.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
4.
How do I remove the presser foot holder?
5.
Place a spool of thread on a spool pin.
6.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
7.
"Change to the single needle mode." appears on the LCD.
8.
How do I wind the bobbin?
9.
When thread got tangled.
10.
How to I attach the spool of thread to my machine?
11.
"Delete the selected pattern." message appearing on the LCD. What does it mean?
12.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
13.
Fabric and Thread
14.
Where do I put the oil in my machine?
15.
Upper Threading (Using the twin needle)
16.
It is difficult to pass the thread through the needle bar thread guide(hook).
17.
"Lower the buttonhole lever." appears on the LCD.
18.
"Lift the buttonhole lever." appears on the LCD.
19.
"Disconnect the foot control." appears on the LCD.
20.
"Insert thread cassette." message appearing on the LCD. What does it mean?
21.
Why does the lower thread keep breaking?
22.
"Lower the presser foot lever." appears on the LCD.
23.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
24.
"Can not change." message appearing on the LCD. What does it mean?
25.
"Saving..." message appearing on the LCD. What does it mean?
26.
"Press needle position button to raise needle." appears on the LCD.
27.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
28.
"The safety device has been activated." appears on the LCD.
29.
How do I sew an applique?
30.
How do I manually thread the needle?