FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8060eus.jpg)
CS-8060
39 Results
1.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
2.
An "E3" message appears on the panel.
3.
How to I attach the spool of thread to my machine?
4.
How do I remove the presser foot holder?
5.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.
6.
Combination of fabric, thread and needle
7.
It is difficult to pass the thread through the needle bar thread guide(hook).
8.
An "E5" message appears on the panel.
9.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
10.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
11.
Why does the lower thread keep breaking?
12.
Upper Threading (Using the twin needle)
13.
My auto threader is not working. What should I do?
14.
How do I thread the needle?
15.
The thread is looping when I try to wind a bobbin.
16.
Where do I put the oil in my machine?
17.
How do I manually thread the needle?
18.
How do I load the spool into the thread cassette?
19.
An "E6" message appears on the panel.
20.
An "E2" message appears on the panel.
21.
The thread tension is incorrect.
22.
Why does the upper thread keep breaking?
23.
Why does the needle keep breaking?
24.
How do I sew buttonholes?
25.
Place a spool of thread on a spool pin.
26.
When thread got tangled.
27.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
28.
"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
29.
An "E1" message appears on the panel.
30.
Why does my thread keep jamming?