FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovvm6200deus.jpg)
Innov-is VM6200D
149 Results
31.
How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
32.
How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
33.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
34.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
35.
How do I wind the bobbin?
36.
"Transmitting by USB" message appears on the LCD. What does it mean?
37.
The thread tension is incorrect.
38.
How do I specify the sewing end point with the sensor pen for utility stitches?
39.
If the thread breaks during sewing.
40.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
41.
"Set the clock." message appears on the LCD. What does it mean?
42.
"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
43.
"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
44.
How do I change the volume of operation sounds or alarm sounds?
45.
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
46.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
47.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
48.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
49.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
50.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
51.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
52.
How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
53.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
54.
The bobbin thread cannot be pulled up.
55.
The machine does not make stitches
56.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
57.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
58.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
59.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
60.
How to use the Multi-purpose Screwdriver. [ Position “2” ]