FAQs & Troubleshooting
Popular |
Innov-is VM5100
127 Results
31.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
32.
How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
33.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
34.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
35.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
36.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
37.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
38.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
39.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
40.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
41.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
42.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
43.
How do I clean the race?
44.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
45.
Why is the outline sewing off the pattern?
46.
Upper threading (Point)
47.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
48.
If the thread breaks during sewing.
49.
"Failed to save file." message appears on the LCD. What does it mean?
50.
How do I attach or remove the embroidery frame ?
51.
How do I adjust the clock on the display?
52.
How do I remove or attach the presser foot ?
53.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
54.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
55.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
56.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
57.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
58.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
59.
How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
60.
How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]