FAQs & Troubleshooting
Popular |
Innov-is BQ3100
125 Results
31.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
32.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
33.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
34.
How do I sew buttonholes?
35.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
36.
How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
37.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
38.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
39.
How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
40.
The bobbin thread cannot be pulled up.
41.
The machine does not make stitches
42.
How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
43.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
44.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
45.
How do I remove or attach the presser foot holder?
46.
How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
47.
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
48.
"This key cannot be used at this time." message appears on the LCD. What does it mean?
49.
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
50.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
51.
"This file cannot be used." message appears on the LCD. What does it mean?
52.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
53.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
54.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
55.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
56.
"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
57.
"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
58.
"Set the clock." message appears on the LCD. What does it mean?
59.
"Sensor module error." message appears on the LCD. What does it mean?
60.
"OK to delete the setting?" message appears on the LCD. What does it mean?