FAQs & Troubleshooting
Popular |
RJ-2035B
53 Results
1.
I don't know the Product Key Code for BarTender UltraLite Edition 2021 (BarTender Designer for Brother).
2.
Enable or disable Bluetooth Low Energy (BLE)
3.
How to add a new stock from the Seagull driver
4.
BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
5.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
6.
How to install the Roll Spacer Set (Optional)
7.
Using the CommTool (for Windows)
8.
Where can I find the printer's network settings, such as IP address?
9.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
10.
Will my printer automatically turn itself off?
11.
The left or right side of the label is not printed correctly.
12.
I cannot install the Windows driver.
13.
How to execute the printer configuration (Self-test) to debug
14.
How to update the firmware
15.
How to update firmware to all printers on the same subnet at the same time
16.
How to open the Devices and Printers window
17.
How to transfer the print programs or templates using FBPL commands
18.
How to identify your Operating System (OS) for Windows or Mac
19.
Printing is not possible.
20.
I can no longer print from my computer via Bluetooth®, even though I was able to print previously.
21.
How to change the speed and density in BarTender
22.
How to adjust the printout position
23.
I cannot automatically reconnect my iPhone 11 to the printer via Bluetooth®.
24.
I cannot automatically connect the printer to my iOS/iPadOS device via Bluetooth®.
25.
I cannot print barcodes correctly using BarTender.
26.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
27.
The linerless roll is jammed inside the printer and not ejected correctly.
28.
I cannot pair the printer with a Bluetooth® device as my iOS / iPadOS device reconnects to the printer automatically.
29.
I cannot print correctly using the Windows printer driver
30.
I cannot print with ESC/POS commands or CPCL commands