FAQs & Troubleshooting
Popular |
TD-4420TN
99 Results
1.
Using the CommTool (for Windows)
2.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
3.
How to change the speed and density in BarTender
4.
How to connect the printer to your computer (for Windows)
5.
The label is skipped when printing.
6.
How to load the Media
7.
How to install the Windows driver via Wi-Fi®/ wired network
8.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
9.
How to execute the printer configuration (Self-test) to debug
10.
How to attach the External Roll Mount (Optional)
11.
The time on the printer is incorrect.
12.
How to change the printer code page
13.
How to load the Ribbon
14.
The printing position of small label is incorrect.
15.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
16.
How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)
17.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Paper".
18.
I cannot install the Windows driver.
19.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.
20.
How to add a new stock from the Seagull driver
21.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
22.
How do I select just certain data (cells) in the Excel spreadsheet to place on the label? (P-touch Editor 5.x for Windows)
23.
The power indicator does not light.
24.
I installed "Printer Driver" and "Printer Driver for P-touch Editor" using a USB cable, but I cannot print with "Printer Driver for P-touch Editor".
25.
The left or right side of the label is not printed correctly.
26.
How to set the Direct Thermal or Thermal Transfer Print Methods
27.
How to update the firmware
28.
The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows “Head Open”.
29.
How to transfer the print programs or templates using FBPL commands
30.
How to adjust the cut position (For Windows)