FAQs & Troubleshooting
![]() |
Latest |

PR1050X
126 Results
1. 25/01/2021
How to set up the cap frame (PRCF5 / PRCF5AP) [Video instructions]
2. 30/10/2020
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
3. 23/09/2020
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
4. 11/09/2020
How do I adjust the tension of the bobbin thread ?
5. 02/08/2020
How do I install the bobbin wound with thread?
6. 02/08/2020
"Check upper and bobbin thread." message appears on the LCD. What does it mean?
7. 02/08/2020
"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
8. 02/08/2020
"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
9. 02/08/2020
"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
10. 02/08/2020
"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
11. 02/08/2020
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
12. 02/08/2020
"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
13. 02/08/2020
"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
14. 02/08/2020
"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
15. 02/08/2020
"Go to Embroidering Screen and press the unlock key." message appears on the LCD. What does it mean?
16. 02/08/2020
"This pattern cannot combine." message appears on the LCD. What does it mean?
17. 02/08/2020
"This pattern cannot be used." message appears on the LCD. What does it mean?
18. 02/08/2020
"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
19. 02/08/2020
"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
20. 02/08/2020
"Needle threader is in threading position." message appears on the LCD. What does it mean?
21. 02/08/2020
"Picker error" message appears on the LCD. What does it mean?
22. 02/08/2020
"Needle threader error" message appears on the LCD. What does it mean?
23. 02/08/2020
"Needle bar case home position error." message appears on the LCD. What does it mean?
24. 02/08/2020
"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
25. 02/08/2020
"Needle case motor has been locked." message appears on the LCD. What does it mean?
26. 02/08/2020
"Needle bar case position error" message appears on the LCD. What does it mean?
27. 02/08/2020
"Inappropriate needle stop position" message appears on the LCD. What does it mean?
28. 02/08/2020
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
29. 02/08/2020
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
30. 02/08/2020
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?