FAQs & Troubleshooting
Popular |
PR1050X
132 Results
31.
Maintenance (Cleaning around the needle plate) [ Video ]
32.
Maintenance (Clean the hook) [ Video ]
33.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
34.
Temporary needle bar setting
35.
"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
36.
How do I adjust the tension of the bobbin thread ?
37.
How to use the Round frame (PRPRFK1) [Video instructions]
38.
How do I embroider on large pieces of fabric or heavy clothing ?
39.
How do I attach Iron-On Stabilizer (Backing) to Fabric ?
40.
Convenience of the manual color sequence
41.
"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
42.
"Check upper and bobbin thread." message appears on the LCD. What does it mean?
43.
Maximum sewing speed setting
44.
Embroidery pattern does not sew out correctly.
45.
There are needle cuts or holes in the garment.
46.
Although the thread is not broken, a broken thread error occurs and the machine stops.
47.
"This pattern cannot be used." message appears on the LCD. What does it mean?
48.
How do I adjust the tension of the upper thread ?
49.
Maintenance (Oiling the machine)
50.
"Needle bar case position error" message appears on the LCD. What does it mean?
51.
"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
52.
How do I check the thread tension ?
53.
Nothing happens, even if the LCD display is pressed.
54.
Changing the Thread Spools with Designs of Eleven or More Colors
55.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
56.
"OK to cancel embroidering?" message appears on the LCD. What does it mean?
57.
Embroidery Data Precautions (About the types of embroidery data that can be used.)
58.
How do I embroider on small pieces of fabric ?
59.
How do I resume embroidering after turning off the machine ?
60.
"Inappropriate needle stop position" message appears on the LCD. What does it mean?