FAQs & Troubleshooting
Popular |
Innov-is XE2
150 Results
1.
Tutorial videos on how to use My Design Snap with the machine [Video instructions]
2.
"The safety device was activated since the main shaft motor was heated. Is the thread tangled?" message appears on the LCD. What does it mean?
3.
How do I Play the MPEG-4 (MP4) Videos?
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
Data cannot be transferred even though the machine number has been input. (M5622201)
6.
How to use the Multi-purpose Screwdriver.
7.
How to embroider an appliqué pattern [Video instructions]
8.
M2102501 appears on the Artspira app screen.
9.
Introducing Brother My Design Snap application
10.
The App shows the message "The embroidery frame cannot be detected. Please try again to photo an image."
11.
The App shows the message "Embroidery positioning sticker not found".
12.
The App shows the message "The embroidery frame cannot be detected."
13.
The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
14.
Bobbin thread does not wind neatly on the bobbin.
15.
How do I adjust thread tension for embroidering?
16.
How do I hoop the fabric in the embroidery frame?
17.
Embroidery pattern does not sew out correctly.
18.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
19.
"Remove the embroidery frame." message appears on the LCD. What does it mean?
20.
M5613201 appears on the Artspira app screen.
21.
The pattern transferred from the Artspira app does not appear on the screen of the machine
22.
There is no machine that can be transferred
23.
"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?
24.
The App shows the message "Connection to the machine failed. Please reestablish the connection between the device and the machine."
25.
The App shows the message "Machine cannot accept the additional image. Please proceed to embroidery screen then select OK to the message ... mobile app. Update?"
26.
Tutorial videos on how to use My Design Snap with the machine [Video instructions]
27.
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
28.
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
29.
"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
30.
High-pitched sound while embroidering