FAQs & Troubleshooting
Popular |
Innov-is VQ2400
109 Results
31.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
32.
"Lower the buttonhole lever." message appears on the LCD. What does it mean?
33.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
34.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
35.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
36.
The bobbin thread cannot be pulled up.
37.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
38.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
39.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
40.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
41.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
42.
"Set the clock." message appears on the LCD. What does it mean?
43.
"OK to delete the setting?" message appears on the LCD. What does it mean?
44.
"Failed to save file." message appears on the LCD. What does it mean?
45.
How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
46.
How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
47.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
48.
How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
49.
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
50.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
51.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
52.
"USB media error" message appears on the LCD. What does it mean?
53.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
54.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
55.
For better results when sewing stretch fabrics
56.
How do I change the volume of operation sounds or alarm sounds?
57.
How do I thread my machine when using the twin needle mode ?
58.
How do I thread my machine ?
59.
How do I wind the bobbin?
60.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?