FAQs & Troubleshooting
Popular |
CM550DX/ CM550
300 Results
1.
Mat and Cutting Blade Combinations
2.
About Blade Extension, Cutting Pressure and Mat
3.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
4.
List of Error Messages for CanvasWorkspace (Others)
5.
Adjusting the Blade Extension
6.
What type of data can my ScanNCut machine be used?
7.
Preparation of Craft Paper / Fabric
8.
E12002 appears on the computer screen.
9.
E00009 appears on the computer screen.
10.
Can I create the cutting data for ScanNCut from the image data?
11.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
12.
Mat and Material Combinations
13.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
14.
E02005 appears on the computer screen.
15.
Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
16.
I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
17.
There are deep cuts completely through the mat.
18.
The mat cannot be recognized.
19.
ErrS10 appears on the computer screen.
20.
ErrS09 appears on the computer screen.
21.
ErrS04 appears on the computer screen.
22.
E12003 appears on the computer screen.
23.
E94001 appears on the computer screen.
24.
E00004 appears on the computer screen.
25.
E00003 appears on the computer screen.
26.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
27.
The mat or the material catches on a feed roller during cutting/drawing.
28.
Can I create the cutting data for ScanNCut from vector graphics data?
29.
ErrS51 appears on the computer screen.
30.
Can rough material be cut?