FAQs & Troubleshooting
Popular |
CM110
299 Results
1.
Adjusting the Blade Extension
2.
The mat or the material catches on a feed roller during cutting/drawing.
3.
Mat and Material Combinations
4.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
5.
The mat is fed in at an angle and is not fed during cutting / drawing.
6.
Mat and Cutting Blade Combinations
7.
List of Error Messages for CanvasWorkspace (Others)
8.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
9.
About Blade Extension, Cutting Pressure and Mat
10.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
11.
Downloading Optional Design Pattern Collection
12.
E03002 appears on the computer screen.
13.
How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
14.
E99902 appears on the computer screen.
15.
E91002 appears on the computer screen.
16.
How to adjust the output smoothing level on Enhanced Image Tracing function. [Video]
17.
What is the maximum area that the machine can scan?
18.
Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
19.
Can I create the cutting data for ScanNCut from the image data?
20.
E10005 appears on the computer screen.
21.
E00006 appears on the computer screen.
22.
How do I Scan for Cutting (Direct Cut) ?
23.
E11010 appears on the computer screen.
24.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
25.
ErrS09 appears on the computer screen.
26.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
27.
An error appears when trying to import a DXF file.
28.
What should I do if the scanned and cut positions are misaligned?
29.
ErrS51 appears on the computer screen.
30.
ErrS10 appears on the computer screen.