FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovve2200eas.jpg)
Innov-is VE2200
68 Results
31.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
32.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
33.
When thread got tangled.
34.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
35.
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
36.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
37.
"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
38.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
39.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
40.
"This USB media is incompatible." message appears on the LCD. What does it mean?
41.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
42.
"USB media error" message appears on the LCD. What does it mean?
43.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
44.
Why does the lower thread keep breaking?
45.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
46.
If the thread breaks during sewing.
47.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
48.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
49.
How do I attach or remove the embroidery frame ?
50.
How do I wind the bobbin?
51.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
52.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
53.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
54.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
55.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
56.
Why is the outline sewing off the pattern?
57.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
58.
How do I change the volume of operation sounds or alarm sounds?
59.
How do I attach or remove the Embroidery Unit?
60.
How do I adjust the clock on the display?