TJ-4420TN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lptj4420tneas.jpg)
TJ-4420TN
Sort by
20 Results
1. 13/12/2021
How to adjust the cut position (For Windows)
2. 13/12/2021
How to set the Direct Thermal or Thermal Transfer Print Methods
3. 29/01/2021
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
4. 29/01/2021
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
5. 28/09/2020
Printing the printer configuration (Self-test)
6. 28/09/2020
The print quality is poor.
7. 28/09/2020
The left or right side of the label is not printed correctly.
8. 28/09/2020
The printed label is wrinkled.
9. 28/09/2020
How to skip the AUTO.BAS program only one time by directly operating the printer
10. 28/09/2020
How to execute the printer configuration (Self-test) to debug
11. 28/09/2020
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
12. 28/09/2020
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
13. 20/02/2020
When printing with the thermal transfer method, the print or cutting position gradually shifts.
14. 19/02/2020
Printing is not possible.
15. 13/03/2019
The printing position of small label is incorrect.
16. 13/03/2019
How to change the speed and density in BarTender
17. 13/03/2019
How to change the printer code page
18. 13/03/2019
How to adjust the tear position in BarTender
19. 13/03/2019
How to adjust the printout position
20. 13/03/2019
How to add a new stock from the Seagull driver