FAQs & Troubleshooting
Popular |
HL-L8240CDW
127 Results
Note: “*” indicates that the content is from the Online User’s Guide.
1.
(Video) Paper is Jammed in the Manual Feed Slot
2.
(Video) Paper is Jammed in the Back of the Machine
3.
I still receive the error message "Replace Drum", "Drum End Soon" or "Drum Stop" after I replace the drum unit with a new one.
4.
Adjust color settings by using the custom setting in the printer driver (Windows only)
5.
The printer status is Offline or Paused.
6.
Set up a Brother machine and your mobile device on a wireless (Wi-Fi) network
7.
Can I use non-Brother or third party supplies with the Brother machine?
8.
I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
9.
Check the remaining ink or toner level (Linux)
10.
Wrong Toner Cartridge
11.
Enable the Brother machine's network interface.
12.
Discover the MAC address of the Brother network card
13.
No Toner
14.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
15.
What is the default password for my BRAdmin or Web Based Management?
16.
Toner Low
17.
Drum !
18.
Out of Memory
19.
(Video) Paper is Jammed in the 2-sided Tray
20.
(Video) Paper is Jammed inside the Machine
21.
I cannot connect my machine to a Windows 11 computer via USB.
22.
Update the Driver or Firmware for your Brother machine
23.
Set up your Brother machine on a wireless network (Windows/macOS)
24.
Install the Brother Mobile Connect application (for mobile device)
25.
(Video) Set up your Brother machine
26.
When I run the Firmware update tool, the "Program failed to run" message appears on my PC screen.
27.
I cannot install Brother drivers on Debian 10 or later (Linux)
28.
Wireless setup is requesting a WPS PIN to complete the setup
29.
I cannot print using my Brother machine on a wired network (Windows/macOS)
30.
I cannot print on a wireless (Wi-Fi) network (Windows)