FAQs & Troubleshooting
Latest |
SuperGalaxie 3000/3100D
75 Results
31. 20/11/2012
Why does the upper thread keep breaking?
32. 20/11/2012
Why does the needle keep breaking?
33. 08/11/2011
Where do I put the oil in my machine?
34. 15/06/2009
"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?
35. 10/06/2009
How do I sew such as vinyl, leather, quilting layers and velvet?
36. 07/04/2009
"Lower the presser foot lever." appears on the LCD.
37. 07/04/2009
How do I remove the presser foot holder?
38. 07/04/2009
How do I sew buttonholes?
39. 07/04/2009
How do I sew an applique?
40. 07/04/2009
Fabrics and stabilizer material for embroidery
41. 07/04/2009
Place a spool of thread on a spool pin.
42. 07/04/2009
How do I correctly install a bobbin?
43. 04/03/2009
How do I create a space between characters?
44. 04/03/2009
"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
45. 04/03/2009
"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
46. 04/03/2009
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
47. 04/03/2009
"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
48. 26/02/2009
"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
49. 26/02/2009
"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
50. 26/02/2009
"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
51. 26/02/2009
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
52. 26/02/2009
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
53. 10/07/2006
"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
54. 10/07/2006
"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?
55. 10/07/2006
"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?
56. 14/06/2006
"Formatting the floppy disk." message appearing on the LCD. What does it mean?
57. 14/06/2006
"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
58. 14/06/2006
"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?
59. 14/06/2006
"Deleting..." message appearing on the LCD. What does it mean?
60. 14/06/2006
"Saving..." message appearing on the LCD. What does it mean?