SuperGalaxie 3000/3000C/3000D/3100D
FAQs & Troubleshooting |
SuperGalaxie 3000/3100D
Sort by
48 Results
1. 12/07/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 09/07/2019
"Remove the embroidery frame." message appears on the LCD. What does it mean?
3. 06/08/2018
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
4. 03/08/2018
"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
5. 04/06/2018
"Raise presser foot lever." message appearing on the LCD. What does it mean?
6. 29/07/2016
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
7. 29/07/2016
"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
8. 29/07/2016
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
9. 29/07/2016
"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
10. 14/05/2015
"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
11. 14/05/2015
"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
12. 14/05/2015
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
13. 14/05/2015
"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
14. 14/05/2015
"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
15. 14/05/2015
"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
16. 15/06/2009
"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?
17. 07/04/2009
"Lower the presser foot lever." appears on the LCD.
18. 04/03/2009
"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
19. 04/03/2009
"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
20. 04/03/2009
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
21. 04/03/2009
"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
22. 26/02/2009
"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
23. 26/02/2009
"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
24. 26/02/2009
"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
25. 26/02/2009
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
26. 26/02/2009
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
27. 10/07/2006
"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
28. 10/07/2006
"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?
29. 10/07/2006
"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?
30. 14/06/2006
"Formatting the floppy disk." message appearing on the LCD. What does it mean?