FAQs & Troubleshooting
Popular |
Innov-is M330E
101 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
3.
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
4.
Touch panel is malfunctioning.
5.
The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
6.
"Preventive maintenance is recommended." ppears on the LCD.
7.
The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
8.
How do I adjust thread tension for embroidering?
9.
How do I remove or attach the Embroidery foot ?
10.
How do I set the bobbin?
11.
The pattern transferred from the Artspira app does not appear on the screen of the machine
12.
Data cannot be transferred even though the machine number has been input. (M5622201)
13.
"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
14.
Stitches are skipped
15.
How do I adjust the sensitivity of the operation keys?
16.
How do I wind the bobbin?
17.
"Not enough available memory to save." message appears on the LCD. What does it mean?
18.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
19.
M5612301 appears on the Artspira app screen.
20.
[Embroidery machine users] How to retrieve the data transferred from Artspira
21.
"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
22.
"F02" appears on the LCD. What does it mean?
23.
How do I attach or remove the embroidery frame ?
24.
"USB media error" message appears on the LCD. What does it mean?
25.
How to connect your machine and transfer data to Artspira
26.
Introducing the Brother Artspira application
27.
"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
28.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
29.
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
30.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?