FAQs & Troubleshooting
Popular |
CM700
327 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
Downloading Optional Design Pattern Collection
3.
Mat and Cutting Blade Combinations
4.
Adjusting the Blade Extension
5.
Mat and Material Combinations
6.
How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
7.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
8.
List of Error Messages for CanvasWorkspace (Others)
9.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
10.
Can I create the cutting data for ScanNCut from the image data?
11.
The mat or the material catches on a feed roller during cutting/drawing.
12.
What should I do if the scanned and cut positions are misaligned?
13.
How to create an account for CanvasWorkspace
14.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
15.
How to use Enhanced Image Tracing function. [Video]
16.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
17.
Can I create the cutting data for ScanNCut from vector graphics data?
18.
What type of data can my ScanNCut machine be used?
19.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
20.
Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
21.
The machine is turned off (Auto Shut Down).
22.
How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
23.
The mat is fed in at an angle and is not fed during cutting / drawing.
24.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
25.
N12001 appears on the computer screen.
26.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
27.
Important Notice for using the Foil Transfer Starter Kit
28.
ErrS99 appears on the computer screen.
29.
ErrS06 appears on the computer screen.
30.
ErrS04 appears on the computer screen.