FAQs & Troubleshooting
Latest |
Innov-is NV2600
125 Results
61. 10/04/2018
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
62. 10/04/2018
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
63. 10/04/2018
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
64. 21/07/2017
For better results when sewing stretch fabrics
65. 21/07/2017
"F**" appears on the LCD. What does it mean?
66. 21/07/2017
"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
67. 21/07/2017
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
68. 21/07/2017
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
69. 28/02/2017
Combination of fabric, thread and needle
70. 28/02/2017
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
71. 28/02/2017
How do I sew with the twin needle?
72. 28/02/2017
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
73. 28/02/2017
How do I remove or attach the presser foot holder?
74. 28/02/2017
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
75. 28/02/2017
Tangled thread on wrong side of fabric
76. 28/02/2017
Fabric is caught in the machine and cannot be removed
77. 28/02/2017
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
78. 28/02/2017
How do I remove or attach the Embroidery foot ?
79. 28/02/2017
How do I attach or remove the Embroidery Unit?
80. 28/02/2017
How do I change the needle ?
81. 28/02/2017
How do I remove or attach the presser foot ?
82. 28/02/2017
How do I thread the machine (Threading the upper thread)?
83. 28/02/2017
How do I wind the bobbin?
84. 28/02/2017
"Turn off the power and replace the needle plate." appears on the LCD.
85. 28/02/2017
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
86. 28/02/2017
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
87. 28/02/2017
"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
88. 28/02/2017
"Raise the buttonhole lever." message appears on the LCD. What does it mean?
89. 28/02/2017
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
90. 28/02/2017
How do I clean the race?