FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov6000d1eas.jpg)
Innov-is I /
Innov-is 6000D
166 Results
31.
"Cannot recognize the fabric edge." message appears on the LCD. What does it mean?
32.
How do I change the volume of operation sounds or alarm sounds?
33.
How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
34.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
35.
How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
36.
Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
37.
How do I recall a specific embroidery pattern from the computer?
38.
How do I clean the race?
39.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
40.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
41.
If the thread breaks during sewing.
42.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
43.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
44.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
45.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
46.
Sewing is started even though the presser foot is raised.
47.
The stitch patterns cannot be selected.
48.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
49.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
50.
"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
51.
"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?
52.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
53.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
54.
"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
55.
"Preventive maintenance is recommended" appears on the LCD.
56.
"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
57.
"There are no enough colors in the thread table, for the selected mode." message appears on the LCD. What does it mean?
58.
How do I set the bobbin ?
59.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
60.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?