Innov-is XP2
FAQs & Troubleshooting |
Innov-is XP2
Sort by
55 Results
1. 12/07/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 12/07/2024
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
3. 12/07/2024
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
4. 12/07/2024
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
5. 12/07/2024
"Attach the embroidery frame." message appears on the LCD. What does it mean?
6. 12/07/2024
"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
7. 21/05/2024
"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
8. 03/04/2023
"Failed to save file." message appears on the LCD. What does it mean?
9. 24/01/2023
"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
10. 24/01/2023
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
11. 18/01/2023
"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
12. 24/09/2021
"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
13. 08/09/2021
"The wireless setting is not activated." message appears on the LCD. What does it mean?
14. 08/09/2021
"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?
15. 09/07/2019
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
16. 09/07/2019
"Select a stitch." message appears on the LCD. What does it mean?
17. 09/07/2019
"Not enough available memory to save the data. Delete some patterns or use a different media." message appears on the LCD. What does it mean?
18. 09/07/2019
"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
19. 09/07/2019
"OK to delete the setting?" message appears on the LCD. What does it mean?
20. 09/07/2019
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
21. 09/07/2019
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
22. 09/07/2019
"This USB media cannot be used." message appears on the LCD. What does it mean?
23. 09/07/2019
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
24. 09/07/2019
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
25. 06/08/2018
"This key cannot be used at this time." message appears on the LCD. What does it mean?
26. 06/08/2018
"Preventive maintenance is recommended" appears on the LCD.
27. 06/08/2018
"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
28. 06/08/2018
"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
29. 06/08/2018
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
30. 06/08/2018
"OK to move the embroidery carriage to its previous position?" message appears on the LCD. What does it mean?