FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov750eeas.jpg)
Innov-is 750E
44 Results
1.
Where do I put the oil in my machine?
2.
How do I clean the race?
3.
How do I attach the embroidery frame?
4.
How do I wind the bobbin?
5.
F** or "F*" appears on the LCD. What does it mean?
6.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
7.
How do I adjust a bobbin case using an embroidery pattern?
8.
Why does the lower thread keep breaking?
9.
Upper threading (Point)
10.
How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
11.
How do I save often-used patterns in the machine's memory?
12.
Place a spool of thread on a spool pin.
13.
When thread got tangled.
14.
"This pattern cannot be used." message appearing on the LCD. What does it mean?
15.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
16.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
17.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
18.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
19.
Fabrics and stabilizer material for embroidery
20.
It is difficult to pass the thread through the needle bar thread guide(hook).
21.
How do I create a space between characters?
22.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
23.
"Deleting..." message appearing on the LCD. What does it mean?
24.
"Saving..." message appearing on the LCD. What does it mean?
25.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
26.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
27.
How do I select patterns from the embroidery cards (sold separately)?
28.
How do I correctly install a bobbin?
29.
Upper Threading (Threading the upper thread)
30.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?