1.

Touch panel is malfunctioning.

2.

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

3.

How do I set the bobbin?

4.

How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]

5.

Combination of fabric, thread and needle

6.

How to make adjustments to character or decorative stitch patterns

7.

Tips for sewing thin fabrics

8.

How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]

9.

How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]

10.

How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]

11.

How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]

12.

How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]

13.

Tips for sewing an even seam allowance

14.

Upper threading [Video instructions]

15.

How do I adjust a stitch width or length?

16.

How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?

17.

How do I adjust thread tension for embroidering?

18.

How do I hoop the fabric in the embroidery frame?

19.

Embroidery

20.

How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]

21.

How do I attach or remove the embroidery frame ?

22.

How do I pull up the bobbin thread?

23.

Stitch Data Precautions (About the types of stitch data that can be used in the Character/Decorative Stitch memory)

24.

Tips for getting better embroidery results

25.

Embroidery Data Precautions (About the types of embroidery data that can be used.)

26.

How do I remove or attach the presser foot holder?

27.

Upper thread tightened up

28.

How do I retrieve stitch patterns saved in the machine's memory or a USB flash drive?

29.

"F04" appears on the LCD. What does it mean?

30.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD. What does it mean?