FAQs & Troubleshooting
Popular |
Innov-is NV800E
57 Results
1.
How do I select or display patterns according to the embroidery frame size?
2.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
3.
Tutorial videos on how to use the machine [Video instructions]
4.
How do I hoop the fabric in the embroidery frame?
5.
How do I adjust thread tension for embroidering?
6.
How to use the Multi-purpose Screwdriver.
7.
How do I set the bobbin ?
8.
Stitches are skipped
9.
How do I change the font type in the embroidery pattern?
10.
How do I retrieve the patterns from the machine’s memory?
11.
Where do I put the oil in my machine?
12.
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
13.
How do I remove or attach the Embroidery foot ?
14.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
15.
How do I adjust the sensitivity of the operation keys?
16.
How do I enter a line feed in the embroidery pattern?
17.
"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
18.
When the thread became tangled under the bobbin winder seat
19.
How do I change the needle ?
20.
How do I remove or attach the presser foot ?
21.
"This USB media cannot be used." message appears on the LCD. What does it mean?
22.
"This pattern cannot be used." message appears on the LCD. What does it mean?
23.
How do I attach or remove the Embroidery Unit?
24.
How do I clean the race?
25.
"Preventive maintenance is recommended" appears on the LCD.
26.
"F**" appears on the LCD. What does it mean?
27.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
28.
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
29.
Needle breaks.
30.
Upper thread breaks.