FAQs & Troubleshooting
Popular |
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
2.
"Preventive maintenance is recommended" appears on the LCD.
3.
How to use the Multi-purpose Screwdriver.
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
"This file cannot be used." message appears on the LCD. What does it mean?
6.
How do I adjust the clock on the display?
7.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
8.
How do I clean the race?
9.
Embroidery
10.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
11.
How do I change the volume of operation sounds or alarm sounds?
12.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
13.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
14.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
15.
"Failed to save file." message appears on the LCD. What does it mean?
16.
How do I set the bobbin ?
17.
Where do I put the oil in my machine?
18.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
19.
"This USB media is incompatible." message appears on the LCD. What does it mean?
20.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
21.
"This USB media cannot be used." message appears on the LCD. What does it mean?
22.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
23.
When thread got tangled.
24.
"Set the clock." message appears on the LCD. What does it mean?
25.
How do I attach or remove the embroidery frame ?
26.
How do I remove or attach the Embroidery foot ?
27.
How do I change the needle ?
28.
How do I thread my machine ?
29.
How do I create a space between characters?
30.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?