NX-400Q/400
FAQs & Troubleshooting |
NX-400Q/400
Date: 02/10/2007 ID: faqh00000002_000
How do I correctly install a bobbin?
- Make sure bobbin thread unrolls in the correct direction when installing the bobbin into bobbin case.
- Be sure to set a bobbin so that thread unrolls in the correct direction.
If the thread unrolls in the wrong direction, the needle may break or the thread tension will be incorrect.
- Use a bobbin that has been correctly wound with thread.
Otherwise, the needle may break or the thread tension will be incorrect.Wound evenly Wound poorly - Be sure to insert the thread through the tension-adjusting spring of the bobbin case.
In step 3 and 4 below, a hint for inserting thread through tension-adjusting spring and how to check if it's properly inserted will be described.Tension-adjusting spring - When embroidering
surface of fabric
underside of fabricAs shown in the left pictures, only a bobbin thread appears on both sides of fabric if the thread is not inserted through the tension-adjusting spring. - When utility stitch sewing
Surface Upper thread
Bobbin thread
Locks appear on the surface of fabric - In case of a machine equipped with Quick-set bobbin (needle plate with a cutter for bobbin thread), lightly hold down a bobbin with your finger and cut the thread with the cutter when installing a bobbin into a bobbin case so that the thread can be inserted through the tension-adjusting spring surely.
Cutter - If thread is inserted through the tension-adjusting spring surely, the bobbin thread passes over the bobbin when it is pulled up, as shown in the below illustration.
Upper thread
Bobbin thread
Upper thread
Bobbin thread
You will feel some resistance when pulling the thread toward the blue arrow direction, if the thread is surely inserted through the tension-adjusting spring.
However, you will be able to pull the thread easily without any resistance or friction, if thread is not inserted through the tension-adjusting spring.
FS155, Innov-is 1200, Innov-is 1500D/1500, Innov-is 15P, Innov-is 400, Innov-is 4000D/4000, Innov-is 55P, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 95E, Innov-is 980K, Innov-is I / Innov-is 6000D, Innov-is Ie, NX-400Q/400, PS-53/55/57
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.