FAQs & Troubleshooting

Close

PR655/PR655C

FAQs & Troubleshooting

FAQs & Troubleshooting

PR655/PR655C

Not your product?

Date: 01/02/2007 ID: faqh00000317_000

Why is the outline sewing off the pattern?

This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.

  •  Improper backing material (stabilizer) is put on the fabric.
    Thick stabilizer has to be used for elastic or thin fabric.

One Point Advice  Fabric/stabilizer compatibility chart

  • Fabric must be set in frame tightly.

One Point Advice  Embroidery

  • The embroidery frame is too large for the size of the embroidery.
    Use an embroidery frame that matches the size of the embroidery.

One Point Advice  Recommendation accessories

  • The embroidery frame is not correctly attached to the carriage.
    Correctly attach the embroidery frame to the carriage.
    Make sure that the pins on the left and right arms of the embroidery frame holder securely fit into the holes in the handles on the embroidery frame.

  • The carriage moved while removing embroidery frame.
    The pattern may become misaligned if the presser foot was hit or the carriage was moved while replacing bobbin thread, changing needle, or working near embroidery frame.
    Be careful when removing and reattaching the embroidery frame while replacing bobbin thread, changing needle, or working near embroidery frame.
    If the carriage is moved, turn the machine off, then on again.
    The correct frame position at the time that the machine was stopped is stored in the machine's memory, and the embroidery frame is returned to the correct position.

  • Decrease the upper thread tension manually to the best thread tension setting or less.

  •  If the thread is tangled. Use tweezers to remove any tangled thread from the hook.

Related Models

PR-600/600C, PR-620/620C/600II/600IIC, PR-650/650C, PR650e/PR650eC, PR655/PR655C

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.