FAQs & Troubleshooting



FAQs & Troubleshooting

FAQs & Troubleshooting


Not your product?

Date: 26/03/2012 ID: faqh00000596_000

Maintenance (Cleaning around the needle plate)

If lint and dust collect around the moving knife, the fixed knife or the thread retaining plate, the thread may not be cut correctly and the error message may appear, or various parts of the machine may be damaged. Make sure to clean around the needle plate once a month. Use on offset screwdriver and the included cleaning brush.

  1. Turn off the embroidery machine.

    Turn off the embroidery machine

    Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur.

  2. With an offset screwdriver, loosen the screws, and then remove the needle plate.

    Remove the needle plate

    1 Needle plate

  3. Use the included cleaning brush to remove any lint and dust from the moving knife, the fixed knife, the thread retaining plate, and their surrounding areas.

    Remove all lint in this area

    1 Remove all lint in this area

  4. After cleaning is finished, attach the needle plate in the opposite way that it was removed in step.

    Attach the needle plate

    1 Needle plate

Related FAQs

Related Models

PR-650/650C, PR650e/PR650eC, PR655/PR655C

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.